Many older Hurstville unit boards still have fuses or a single safety switch. We upgrade them inside the unit and coordinate meter-room access with building management.
Switchboard Upgrade Hurstville: what we typically find
Hurstville's older bungalows often have ceramic fuse boards. In older apartments, unit boards may lack full protection.
We test, replace and label the board.
How the job works in Hurstville
We confirm the timing when we quote, and finish with a Certificate of Compliance for Electrical Work.
If you're planning a duplex, we'll size the new board for the future.
On the day, we isolate the power, remove the old board, fit the new enclosure with circuit breakers and safety switches, reconnect and test every circuit, label everything and restore power. You'll know exactly which breaker controls each part of your home.
In older Hurstville houses, meter panels may be made of materials that contain asbestos. If we suspect this, we take appropriate precautions or recommend testing first.
Signs your board needs attention include ceramic fuses, frequent tripping, a warm or crackling board, or scorch marks.
If you're planning a duplex or granny flat, the new board can be sized with that in mind.
Have this ready when you call
- Photo of board
- Renovation plans
- Building details
Does your board need replacing?
- Ceramic fuses with fuse wire
- No safety switch, or only one
- The board is on an old fibre backing panel
- Breakers or fuses go when several air conditioners run
- You're adding a granny flat, solar, a battery or an EV charger
- The board shows scorch marks or makes a buzzing noise
About Hurstville
A lot of our Hurstville work is in apartments: unit switchboard upgrades, safety switches, extra power points, fault finding and smoke alarms for rentals. We work with building managers whenever a job involves meter rooms, risers or car parks.
Read more about our full switchboard upgrades service across the St George, or see our Hurstville electrician page.
Switchboard Upgrades in Hurstville: FAQs
Will I need rewiring?
Only if circuits fail testing.
How long will the power be off?
Usually a few hours on the day of the upgrade. We'll give you the expected window in advance.
Can you upgrade the switchboard in my Hurstville unit?
Yes. If the board is inside your unit it's usually straightforward. If it's in a shared meter room, we'll arrange access with building management.